Skip to content
Call a painter, 24/7(630) 467-7456
Call (630) 467-7456Answered 24/7

Decks, Fences & Wash in Naperville, IL

Pressure washing in Naperville for siding, decks, fences and patios

Green film on the north wall, a gray deck or a stained driveway? We wash each surface at the pressure it can take, which is the difference between clean and damaged.

We answer 24/7 and book walk-throughs on the first call.

Answering 24/7Naperville service office

Updated September 2026

House siding being washed in Naperville, IL

This job

Pressure Washing

Decks, Fences & Wash · answering 24/7

Quick answer

Pressure washing in Naperville, IL cleans siding, decks, fences, driveways and patios, and each surface needs its own method: siding is soft-washed at low pressure, wood is cleaned gently before stain, and concrete takes higher pressure. Most homes benefit from a wash every year or two.

The job

Clean the surface without damaging it

Dirt, pollen, mildew and algae build up fastest on shaded walls and wood that stays damp. Left alone, mildew stains siding, makes decks slippery and stops new paint or stain from bonding.

We match the method to the surface and protect the rest: plants are wetted and covered, and windows, outlets and lights are shielded before any water goes on.

Soft wash removing green film from vinyl siding

What this job covers

A

House and siding wash

Vinyl, aluminum, fiber cement and painted wood siding are cleaned with a soft wash: a cleaning solution applied at low pressure, left to work, then rinsed. High pressure can drive water behind siding, lift old paint and etch soft surfaces, so we do not blast walls. The wash removes the green and black growth on north and shaded sides, pollen and webs under the eaves, and the chalk that builds up on faded siding before a repaint. Gutters are rinsed from the outside at the same time, and windows are rinsed clean at the end.

Low-pressure rinse of siding and soffits on a two-story home

B

Deck and fence wash

Wood is soft, and too much pressure raises the grain into fuzz that has to be sanded before any stain will look right. We clean decks and fences with a wood cleaner and a wide fan tip at low pressure, then apply a brightener that brings back the color of weathered wood. This is the step before staining, and the wood then needs to dry, usually for a couple of days, before a new coat goes on. Railings, stairs and the underside edges are cleaned as well, since mildew hides there first.

Deck half cleaned, warm wood next to gray weathered boards

C

Driveway and patio cleaning

Concrete driveways, walks and paver patios take higher pressure, applied with a flat surface cleaner so the result is even rather than striped. Oil spots and rust stains are pretreated first, and moss between pavers is cleared. Pavers can lose joint sand when washed, so we refill the joints afterward if needed. Clean concrete looks newer, and it is also the right starting point for a sealer or a garage floor coating. Runoff is directed away from beds and lawn where the slope allows.

Driveway being cleaned with a flat surface cleaner

What to look for

Signs it is time for a wash

  • Green film on north walls

    Algae grows where siding stays shaded and damp.

  • Black specks under the eaves

    Mildew spreads from soffits and shaded corners.

  • Chalky residue on siding

    Faded paint and vinyl leave a powder that dulls the color.

  • Gray, slippery deck boards

    Weathered wood and mildew make boards slick when wet.

  • Dark streaks on the driveway

    Tire marks, oil and dirt settle into the concrete.

  • Moss between patio pavers

    Shaded joints hold moisture and let growth take root.

  • Paint or stain on the schedule

    Any repaint or restain should start with a wash.

Around Naperville

Naperville's humid summers, with regular thunderstorms and most of the year's roughly 36 inches of precipitation, keep shaded siding and decks damp long enough for algae and mildew to grow. Winters bring about 102 days below freezing, so washing is a warm-season job, since water left in wood or concrete joints before a hard frost can do damage. We book washing from spring into early fall and often pair it with painting or staining.

How the job runs

How a wash visit runs

  1. Step 1

    Walk-around

    We look at each surface and agree on what gets washed and how.

  2. Step 2

    Protect

    Plants are wetted and covered; outlets, lights and windows shielded.

  3. Step 3

    Pretreat

    Cleaning solution goes on mildew, algae and stains to loosen them.

  4. Step 4

    Wash

    Each surface is cleaned at the pressure it can safely take.

  5. Step 5

    Rinse

    Everything is rinsed, including plants and nearby windows.

  6. Step 6

    Final walk

    We check the results with you and note anything that needs paint or stain.

What moves the price

What moves the price of pressure washing

Washing is priced by the surfaces and their size, plus what is growing on them.

  1. 01
    Surface and size

    House size, deck area and square feet of concrete set the time.

  2. 02
    Height

    Two-story walls and high soffits take extension wands and more care.

  3. 03
    Growth and stains

    Heavy mildew, algae, oil or rust need pretreatment.

  4. 04
    Surface type

    Soft wash, wood cleaning and concrete cleaning use different equipment.

  5. 05
    Access

    Tight side yards, landscaping and water access affect set-up.

  6. 06
    Follow-on work

    Washing before paint or stain is often priced with that job.

Compare the options

Renting a pressure washer, or having us wash

Rental washers are powerful, and that is exactly the risk.

ItemDoing it yourselfHaving us do it
SidingHigh pressure can force water behind siding and strip paintSoft wash at low pressure with a cleaning solution
WoodA narrow tip gouges and fuzzes deck boardsWide fan tip, wood cleaner and brightener
ConcreteHand wands leave stripes and uneven patchesA flat surface cleaner for an even result
SafetyA ladder plus a pressure wand is a bad combinationExtension wands used from the ground where possible

Straight answers

Pressure washing questions

Ask a painter

Answering now

Book a pressure washing visit in Naperville

Call any hour. Tell us what needs cleaning and we will book a time and send a written estimate.

Call a painter, any hour(630) 467-7456Browse services

One number, both offices

Call and find us in Naperville

Hours
Phones answered 24 hours a day, every day
Service office
1142 E Bailey Rd, Naperville, IL 60565
Head office
1476 Candlewood Dr, Crystal Lake, IL 60014
Coverage
Naperville and the western and northwest suburbs. Counties and towns we cover
Call (630) 467-7456

1142 E Bailey Rd
Naperville, IL

Call (630) 467-7456